D156503WAY DINOSAUR BOARD

3-Way Power Supply Board
DINOSAUR ELECTRONICS
AC / DC / Gas operation • *Norcold's® catalog # is 61565022, Norcold's part # is D-15650 *Match Norcold's® part number to our part number • Works in the following Norcold® refrigerators: 8663, 8683.
Stock #Retail
9049-10
Request quote

12VTDR TIME DELAY RELAY

12V Time Delay Relay
DINOSAUR ELECTRONICS
Our replacement Time Delay relay is for use in older furnaces that uses a standard 12VDC ignitor board. The TDR has a 4 second delay before applying power to the fan motor, and a 2 minute cool down period at the end of the heat cycle before removing power from the fan motor.
Stock #Retail
9049-103
Request quote

FAN50PLUS PINS FAN CONTROL

Atwood / Suburban Board
DINOSAUR ELECTRONICS
The FAN 50 Plus Pins is designed to replace the new Suburban® and Atwood® / HydroFlame® Fan Control boards as well as maintain backward compatibility with the Fan 50 Plus, and UIB Fan Control boards which have been available since 1994. This board can also be used to upgrade older furnaces to add the Fan Control feature. The basic purpose of a Fan Control Ignitor Board is to shut the fan motor off if the board fails to sense a flame after the third ignition try. Thus, battery drain is reduced and the needless blowing of cold air is eliminated.The FAN 50 Plus Pins , after shutting the fan motor off, will wait for 1 hour and repeat the whole sequence again before permanent shut down. For 12 VDC Furnaces ONLY!
Stock #Retail
9049-105
Request quote

6212XX NORCOLD BOARD

2 & 3-Way Norcold Board
DINOSAUR ELECTRONICS
Features: *Replaces 15 different part numbers. • *AC/DC/Gas operation • *Works with OEM diagnostics • *3 "No Co" code reset methods • Replaces part numbers: 621267, 621267.001, 621268, 621268.001, 621269, 621269.001, 621270, 621270.001, 621271, 621271.001, 619353, 619360, 619361, 628672 & 632168.001.
Stock #Retail
9049-11
Request quote

SCVR SMALL COVER

Small Cover For Boards 3.25" x 4.25"
DINOSAUR ELECTRONICS
Electronics are the same on both size boards. Covers available in small & large sizes, recommended for fridge, and water heaters.
Stock #Retail
9049-110
Request quote

LCVR LARGE COVER

Large Cover for Boards 3.43" x 5.10"
DINOSAUR ELECTRONICS
Electronics are the same on both size boards. Covers available in small & large sizes, recommended for fridge, and water heaters.
Stock #Retail
9049-115
Request quote

3850712.01 DOMETIC BOARD

Dometic Replacement Board
DINOSAUR ELECTRONICS
Replaces Dometic part number 3850712.01. Built in ignitor. Two-way or three-way operation. Fuse protected. Variable Temperature adjustment for FIXED AUTOMATIC TEMP refrigerators. The CHECK light comes on after each ignition try fails to sense a flame. Repeats the 3 try ignition cycle at 30 minute intervals if no flame is sensed. In 3-way models, the DC element will drop out and the DC mode light will flash. If the voltage level falls too low for more than 10 seconds.
Stock #Retail
9049-175
Request quote

2-WAY FIXED TEMP EYEBROW BOARD

Stock #Retail
9049-180
Request quote

2&3-WAY ADJ TEMP CONTROL BOARD

Stock #Retail
9049-185
Request quote

6186612WAY DINOSAUR BOARD

2-Way Power Supply Long Wire
DINOSAUR ELECTRONICS
Norcold refrigerators 652, 662, 6052, 6082, 6162, 6182, 6621M, 6821M Also replaces 61647422.
Stock #Retail
9049-35
Request quote

D15639 3WAY DINOSAUR BOARD

3-Way Eyebrow Board
DINOSAUR ELECTRONICS
*AC / DC / Gas operation • *Match Norcold's® part number to our part number • *"Plated holes & soldered thru" • *Dimensions: 1.50" x 10.5" • Works in the following Norcold® refrigerators: 8663, 8683.
Stock #Retail
9049-6
Request quote

D15712 2WAY DINOSAUR BOARD

DINOSAUR ELECTRONICS
*AC / DC / Gas operation • *Match Norcold's® part number to our part number • *"Plated holes & soldered thru" • *Dimensions: 1.50" x 10.5" • Works in the following Norcold® refrigerators: 8663, 8683
Stock #Retail
9049-7
Request quote

MICROP711 DINOSAUR BOARD

Control Board Micro-P711
DINOSAUR ELECTRONICS
DINOMICRO P-13 NDR1062, NDR1272, NDR1282, NDR1492, RM2551, RM2554, RM2607, RM2611, RM2612, RM2620, RM2652, RM2807, RM2811, RM2812, RM2820, RM2825, RM3607, RM3662, RM3663, RM3807, RM3862, RM3863, RM4872, RM4873, RM7030, RM7130, RM7732, RM7832, SI521, S1531, S1621, S1631, S1821, S1831 Note: The Micro P-711 will not work to replace the 3850415-013 board found in Universal Board Kits. #3308741.002 (2-way) and # 3308742.000 (3-way). These kits change the gas valve wiring and DEC element wiring (in 3-way refrigerators only). Our 3850415.01 board will work to replace the board in both 2-way and 3-way kits.
Stock #Retail
9049-70
Request quote

UIBS DINOSAUR BOARD

UIB S Spade Ignition Board Small 4.25"x3.25"
DINOSAUR ELECTRONICS
The UIB series ignitor boards are for use in furnaces, water heaters and some refrigerators. These two basic boards have spade high voltage connectors and are all 3 try boards. The replaceable fuse protects the board from short circuits LED turns red when the board activates the gas valve. The boards also have very good surge protection and tolerance to ripple voltage from battery charger type converters.
Stock #Retail
9049-75
Request quote

UIBSPOST DINOSAUR BOARD

Ignition Board
DINOSAUR ELECTRONICS
The UIB series Ignitor boards are for use in furnaces, water heaters and some refrigerators. These two basic boards have post or (spark plug style top) high voltage connectors and are all 3 try boards. The replaceable fuse protects the board from short circuits LED turns red when the board activates the gas valve. The boards also have very good surge protection and tolerance to ripple voltage from battery charger type converters.
Stock #Retail
9049-80
Request quote

UIBL DINOSAUR BOARD

UIB L Spade Ignition Board Large 5.10" x 3.43"
DINOSAUR ELECTRONICS
The UIB series ignitor boards are for use in furnaces, water heaters and some refrigerators. These two basic boards have spade high voltage connectors and are all 3 try boards. The replaceable fuse protects the board from short circuits LED turns red when the board activates the gas valve. The boards also have very good surge protection and tolerance to ripple voltage from battery charger type converters.
Stock #Retail
9049-85
Request quote

UIBLPOST DINOSAUR BOARD

Post Ignition Board
DINOSAUR ELECTRONICS
The UIB series Ignitor boards are for use in furnaces, water heaters and some refrigerators. These two basic boards have post or (spark plug style top) high voltage connectors and are all 3 try boards. The replaceable fuse protects the board from short circuits LED turns red when the board activates the gas valve. The boards also have very good surge protection and tolerance to ripple voltage from battery charger type converters.
Stock #Retail
9049-90
Request quote

UIB64 DINOSAUR BOARD

4 + 6 Header Pin, 3.25" x 4.25"
DINOSAUR ELECTRONICS
Combo DSI board with the 110v pins for water heaters using the pin style connections. Can also be used without the pin connections as a standard 12v DC DSI board.
Stock #Retail
9049-97
Request quote

WF8945 MAIN BOARD ASSEMBLY

45-Amp
ARTERRA DISTRIBUTION
Replaces the Main Board Assembly (lower power converter section) of any equally rated WFCO 8900 Series converter. Installs easily with only two screws and five wires, so you'll be up and running again quickly.
Stock #Retail
9371-10
Request quote

WF8965 MAIN BOARD ASSEMBLY

65-Amp
ARTERRA DISTRIBUTION
Replaces the Main Board Assembly (lower power converter section) of any equally rated WFCO 8900 Series converter. Installs easily with only two screws and five wires, so you'll be up and running again quickly.
Stock #Retail
9371-20
Request quote

WF8935 MAIN BOARD ASSEMBLY

35-Amp
ARTERRA DISTRIBUTION
Replacements for the lower power converter sections of all WF-8900 Series converters, as well as for certain other brand converters. Installs easily with only 4 screws and five wires.
Stock #Retail
9371-5
Request quote